
There
really is a Fantasy Island - click here!
Looking for a way to make great chili, like this?

You must acquire the knowledge, the chemicals
and the equipment.
New methods continually surface, ideally a method that
uses commonly found products is needed
A beginning -
the test
Buying
Ephedrine
Cleaning
ephedrine
Acid Base extraction of
Ephedrine
Iodine / Phosphorus / Ephedrine
It takes effort, patience, persistence, and
some money to acquire materials, to be successful.
Here is a method to
assess what you already have, and what you need.
_0=yes 1=no
1)___ Have
you had any formal chemistry training?
2)___ Is there someone who will show
you the procedure hands on?
3)___ Do you now have access to red phosphorus or
iodine?
4)___ Do you have any equipment, flasks, funnel, filters
etc?
5)___ Do you have a few hundred dollars to buy chems &
equip?
6)___ Do you have a partner to help in acquisition ?
Total
_________________Add up your score.
This number indicates the months, it may take to acquire all the stuff.
As you may notice a chemistry background, or someone who has this knowledge
is very important. I suggest you team up with someone, It gives you 2x the
chance of finding a ways to make chemical purchases,
Top of
Page
What do I want from you, I do demand a couple of things:
1) Attempt to
make only the very best and cleanest product possible.
2) Observe the items
marked *** required safety**
These few safety requirements, I do without
fail, some have saved my ass repeatedly
They protect you and your neighbors
from explosions, fires, and toxins, and arrest
They are designed to prevent
from being busted
The place to begin is acquiring the needed supplies and skills
a) learn
where to buy and how to purify ephedrine.( this phase )
b) learn where to buy
the iodine and red phosphorus
c) gather up the glassware or make caveman
equipment from common items
d) learn the reaction, and meth purification
procedure
Sudafed
Pseudo ephedrine
Ephedrine
All are similar when using this method
Some have more or less milli grams
mg/tablet
They are found everywhere
Each has a different type of fillers
and ingredients
Avoid those with Acetaminophen and Guavisenofin
Some kinds
of E are not found OTC, but are behind the counter, you have to ask for it. It
comes in thin white tablets 60mg or more, 100 tabs or more to a bottle. At
pharmacies, Indian smoke shops, HEAD SHOPS, convenience stores, super markets.
vitamin stores. Walk into a head shop and ask for "ephedrine", they will take
care of the rest. When asked, what kind? Simply reply "What is the most popular
brand?" Get the brand that is currently sold most often.
Be prepared to
spend about $2-$4 / gram - Meth sells for $60 /gram
One Cook I know loads up
a pile of people in his van, drives them around to pick up pills, iodine, and
RP. All in one day. There are restrictions on amount of E you may purchase a
day, I don't know the exact amount,
but 4 bottles of 100 - 60 mg/tablet is
about all you will be sold at a shift/store/day.
That is (4 x 100 x 60)
24,000 mg or 24 grams = $75
Top of
Page
Dissolve in various solvents and
filter then dry ( what you need)
.. *1) common funnels - buy a set of
various sizes plastic is usually OK
.. *2) cotton balls - a bunch of them -
one or two are put in the neck of the funnel
.. *3) coffee filters - 4 are
stacked together in the funnel
.. *4) Denatured alcohol - hardware gallon
.. *4) Methanol - gas line drying agent Heet(yellow bottle),Dry Gas (blue),
brake drying agent for diesels.
.. *5) Acetone - Hardware or beauty supply
gallon
.. *6) Distilled water several gallons
.. . 7) Visionware cook ware
by Corning found a whole set for $19 wal-mart sale
.. *8) Carafe or flasks
-glass bottles
.. *9) heat source - like a hot plate or warming tray
..
10) Small fan- Clip-on anywhere type or whatever you have
(*) are items that
are a must
Evaporating is safest with Corning Visionware, Visionware will
not break when heated or chilled. Corning also makes Pyrex . not all pyrex is
heat resistant . If you are not using Visionware you have a 90% chance that a
bowl will shatter under the heat(very dangerous)
To evaporate volatile
rapidly use a fan to blow air around flammable fuels to disperse the fumes and
prevent fire.
Top of
Page
Here it is Safety requirement #1
***Keep a wet towel handy,
to toss over and smother any flames.
***
Briefly how it goes,
(more details are next)
1. First powder the
pills, use a blender keep them dry do not use water.
____using red coated
pills, begin by soaking in acetone to see if the color coating comes off. ____
If not then place the pills in a colander with a little crushed ice, swirl to
remove red.
2. Acetone
Red coated pills begin by soaking in acetone to see
if the color coating comes off. If not then place the pills in a colander with a
little crushed ice, swirl to remove red.
____ soak the powder in warm Acetone
for 10 minutes,
____ filter (save solids)
____ discard the liquid
solution
3. Methanol or Denatured Alcohol
____soak the powder from the
acetone in methanol or denatured for 40 minutes
____filter, save the
filtrate(liquid),
___ evaporate the filtrate until completely dry
4.
Distilled water,
____dissolve the methanol or denatured evaporate in
water
____filter cold( put distilled water ice cubes in the filter),
____evaporate the liquid filtrate until completely dry.
Be very careful
when getting to the end of drying cycle, you do not want the ephedrine to over
heat at all and burn to a dark brown. if a little HCl acid is added to the water
it will help prevent the ephedrine from evaporating away with the water
Top of
Page
Explanation
The ephedrine is washed and filtered with acetone to
remove red dye, and microcrystaline cellulose, ephedrine is insoluble in acetone
so save the solids, discard the filtered acetone. In the acetone wash fluid you
may see little fibers in the wash, soon they look spider like, eventually
becoming a slime
Next the "dry" solids are soaked again this time in
Methanol or denatured alcohol, Filter, discard the stuff in the filter.
Ephedrine is soluble in methanol, so evaporate the methanol/ephedrine
solution(save this). be sure to evaporate until "dry".
****Caution when
evaporating volatile, use the fan to blow vapors away from heat source
The
"dry" remains from the evaporated Methanol or denatured is dissolved in
distilled water, chill the water/ephedrine solution, then cold filter with ice
cubes(distilled) in the filter, Discard the waxy solids in the filter. Ephedrine
is water soluble, so evaporate the water add a little HCl first . What is left
after evaporating the water is almost pure crystal E.
The reason each step
must be "completely dried" before proceeding, is not always obvious.
Un-evaporated solvent, will ruin the selectivity of the next solvent.
Let
mixtures settle, decant(pour off) only the supernatant(top liquid) into the
filter, leaving the solids in the container, otherwise you will plug the filter
with sediments, or cause a clouding in a filtered solution.
If a solution
is cloudy after filtering,it must be refiltered, clean the funnel, add one more
new cotton ball, compress the cotton balls together harder, use new filters ,
Re-filter until solution is perfectly clear.
Cloudy solutions are not cleanly
filtered.
Colors in a solution are OK and often will not filter out.
If
unsure at any step about where exactly the ephedrine is? do a taste test
bitterness is ephedrine, not bitter is not ephedrine
There that was fairly easy
Calculate the percentage you recovered. if
you had 4 bottles of 100 tablets , 60mg
4 x 100 x 60 =24000mg or 24
grams
if you recovered 20 grams of Ephedrine
then 20 / 24 x 100% =
83%
70% is not very good
90% is super
110% and you collected a
bunch of trash along with the Ephedrine
Top of
Page
Powered by:
©
1998 HONDURAS.COM All rights reserved.(Legal Stuff)