|
Author
|
 Topic 
|
|
|
jboogie
Tech Support
|
|
 Posted - Mar
17 2005 : 2:10:27 PM   
|
|
I know
this is mainly a phenylethlamine discussion forum, but I have seen
a good bit of interest in the procurement of marijuana derivatives
including: hash, hash oil, and puna butter. Long before the
Boogster was dabbling in coal tar sprits and lye, there was always
the herb. The herb has been a daily staple of Boogies diet for
quite a while now… One thing Boogie prides himself on is his
maximization of production of hemp products from a given amount of
weed.
The first crops, it was bud. Boogie was
stoked it worked and that was that. Boogie did start to notice the
residue that the meager 2 pounds of weed left everywhere. And he
hated throwing all the trim away… it had some crystals on it, and
it smelled ok. What to do…
Boogie got the bright idea that the weed
trimmings could be used to cook with… so he began to save the
crystally trimmings for butter. Well, the bag of trimmings, after a
while, began to collect dust in the corners that was some of the
best smoke in the house… Mental note to self.
Boogie also took a trip to Amsterdam in
96. While there, he attended the Cannabis Cup and saw several
devices for collecting “pollen” (which isn’t even pollen, its
trichromes actually) to produce a high grade hash. This gave him a
shit-load of ideas for his return home, as the machines were
several hundred dollars and he wasn’t having a hash machine sent
home… He also saw a booth that was selling the ice hash method and
bags… This was great!
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
Edited
by - jboogie on Mar 18 2005 7:08:46 PM
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 17 2005 :
2:10:57 PM
|
|
Tips for getting
the most of your crop.
]• Don’t store your finished herb in
plastic bags. Not only is it unattractive, but plastic bags cannot
be scraped like a glass jar can. And plastics are not always air
tight like a hermetically sealed jar can be.
• Don’t pack the weed into the jars.
Give it some room. Packing it in encourages mold growth.
• Don’t store the weed in jars until its
dry. Wait till the weed has reached equilibrium with its
environment before you coup it up. Its like carpentry in general…
14 to 16% moisture is good for storage. Any less and its brittle,
any more it mildews.
• When you clean up the crop, do it over
a large flat, clean area. The action of clipping the buds from the
stems creats a good bit of trichromes that fall off. If you do it
over a scrapable area, you can easily get a couple grams of
“pollen.”
• Store the trimming in the freezer.
This reduces the effects of oxidation and also makes the trichrome
brittle and easily removed.
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
Edited
by - jboogie on Mar 17 2005 2:58:18 PM
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar
17 2005 : 2:13:36 PM
|
|
The easy ice
hash method OTC
So Boogie refuses to pay for those
“Bubble Bags.” The first time he saw them, they were trying to scam
$300 for a set of 5 bags. Fuck them. Boogie isn’t a dumb-ass and he
figured he’d make his own.
What you need, and what Boogie used.
• A blender… just the normal household
blender will do. Should be roughly ¾ of a gallon capacity.
• 2 1 gallon glass tea jugs. Store them
in the freezer or fridge till you need them.
• A piece of very fine cloth, preferably
a high thread count, low thread thickness, synthetic material. Silk
is also acceptable, but must be new and not sueded silk. Boogie had
a collection of Members Only jackets from the break dancing days
(and some parachute pants…) that he doesn’t ware anymore… the
lining of the jacket is perfect. Make it 8 inches by 8 inches.
• A PVC tube. The two inch diameter is
perfect.
• A zip-tie or clamp able to fit around
the PVC tube.
• A bag of CLEAN DISTILLED ICE. Don’t
use the shit you made in the trays… that’s nasty city water and the
chlorine will bleach the flavor outta your delicate herb…  note: dont try to distill ice or you will be
greatly disappointed... almost as disappointed as preparing Anhydrous
H2O...
• A large mirror or plate and a blade…
I’m sure you’ve all got that laying around already, huh?
• A tea strainer or some type of
strainer that has a fine mesh and a handle. I prefer two, in
graduating sizes. It should be like a spoon with a net. Il post
pics after I finsh this.
this is the exact set of strainers
boogie uses..
|
|
and these are the zip ties...
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
Edited
by - jboogie on Mar 17 2005 2:48:28 PM
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 17 2005 :
2:14:23 PM
|
|
Take the blender and add some ice cold
distilled water to the chamber. Add a volume of trim to this water.
Boogie doesn’t add more than 14 grams of trim to his gallon
blender. Any more is trouble. To this mess, add at least 2 cups of
ice. Place the lid on a make a smoothie. That’s the point. We want
a smoothie. The crushed ice is very abrasive, and the low
temperatures make the trichromes very brittle. So this smoothie
action actually scrapes the leaf material pretty clean. If the
blender freezes up (the shit isn’t moving inside) than just add a
little water and jostle it a bit. You want it to be just like a
slush puppy. Run it like this till the blender is hot. Jk… but do
run it for a while. It all about surface area right now.
The shit really isn’t workable like this,
so you gotta let it thaw. Boogie will get it all smoothied, and
then come back every 10 minutes and blast it to mix the shit up
really god and keep the mixture uniform in temperature. Once th mix
is mostly thawed we canstart to work it. You don’t want the shit
room temp at all. The mix should always be under 50 degrees
Fahrenheit. So take the strainer and start straining the shit in a
dipping motion. After each scoop, empty the contents into a clean
glass. This action collects the big weed particles, and allow the
valuable trichromes to fall thru. That’s why we don’t let it
accumulate in the strainer, because it would trap the trichromes…
Keep straining the mix until theres not a floating mass of plant
material in the blender.
Get one of the tea jugs outta the
freezer/fridge and set it on the counter. I place the finer
strainer over the mouth of the jug, and pour the still cold blender
mix into the tea jug. You can hold it with your hand if you want.
If its been a little bit, something cool will have happened… the
residual plant matter will have soaked up some water and expanded
in size. This is great, cause now shit that would slip thru the
sieve will now be trapped. Trichromes are wax and oil, and don’t
swell in water, so they fall right on thru. So pour this thru and
place it in the fridge. We want that shit to stay cold.
Take the weed pulp and place it back in
the blender. This time repeat the straining process after adding
half the volume of the blender in ice cold water to the pulp. No
need to re-blend the shit. We just want to rinse any trichromes
that may have been left behind or trapped. The rinse from this
second should fit in the gallon jug still. If not, that’s why we
had a second jug on stand by.
Now that we have the shit all strained,
we need to get the collection contraption together. Don’t through
out the pulped herb, either… Its still chock full of goods. Get
that piece of PVC out… take the Members Only lining, if that’s what
you chose to use also, and stuff it down the tube with your finger.
You want to poke it in the tube evenly, so that a lip of continuous
fabric runs around the top. With you finger (or chopstick) still
holding the fabric in place, fold back the excess and use the
zip-tie or clamp to hold it in place. When you finish, you will
have basically created a silk bag on the end of a hollow tube…
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 17 2005 :
2:17:16 PM
|
|
now the goods...
If you carefully look at the jug in the
fridge (don’t shake it!) you will see the white mass of trichromes
pooled in the bottom. If you don’t, then your weed really sucked
ass… Carefully remove the jug from the fridge, being careful to not
disturb the contents too much. Holding the PVC in you left (or
right, I don’t give a fuck) pour the green water mix into the tube.
You should be able to bout maybe a half
pint at a time… the reason for not disturbing the contents is
because of the filter. If you pour all that shit in first, then it
clogs up your filter really quickly. So try to save the thick shit
for last… it will be impossible to not get some sediment in
there... Don’t sweat it. I find that forcing air in the top help
expedite the process a great bit, as does gently tapping the “bag”
on the tube. It helps to knock the sediment down to the bottom of
the filter.
Once the filtration is complete, gently
squeeze the bag with a towel or clean rag. This will wick a good
bit of moisture from you hash. Don’t be scarred to squish the fuck
outta the ball. Boogie uses a bench vice, and likes it.
You must be quick with this process. It
only takes me a half hour to do a blender full. Any longer and the
temps would be unacceptable for this technique. Take the Members
Only swatch and gently lay it flat on a plate, hash side up… You
can now see the creation. It should literally look like a cake of
unbleached flower. You may see a few green specks, but for he most
part it should be white. Take the plate with the swatch and place
it in the freezer. You want it to freeze.
This is really cool, and Boogie
developed this part, and he hasn’t seen it in literature or
references yet, so who knows. Take the swatch out of the freezer
and quickly grab the corner of the hash (yes he said grab it, cause
you can for the short period of time it’s frozen) and peel it of
the fabric like a fuckin’ fruit roll up. Do it fast and don’t
bullshit and lollygag. And immediately after you rip it, put it
back on the plate, because it will thaw very quickly. Leave it out
now and let it air dry. This takes about 3 hours maybe, depending
on how thick it is. Big batches might require overnight drying. You
don’t want to dry it in the heat, or the shit will melt and you get
a sticky (but fuckin awesome) mess on a plate, so slow dry it…
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
Edited
by - jboogie on Mar 17 2005 2:24:58 PM
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 17 2005 :
2:38:58 PM
|
|
So now what to
do with the pulp…
So don’t throw the pulp away. It still
got some goods in it. Let’s make butter outta this “trash.” First,
we need to dry it a little bit. Remember the Members Only swatch?
Use it to wring the weed pulp to a semi dry state. When you finish,
remove it from the cloth and place it in a pan big eought to hold
two sticks of butter (8 oz). Since the weed has been scraped,
Boogie tries to double the amount of weed used per butter stick.
Instead of the ounce he would use for 2 sticks, he will now use 2
ounces of ice scraped pulp to cook with. Go ahead and melt the
butter in the pan and bring to an almost simmer. You don’t want to
boil anything, but you do want to heat it pretty good. If you heat
butter really good, it will separate. Butter is a homogenous mix of
milk solids and milk fats. The THC is soluble in those milk fats,
but not the solids. So lets separate them and discard the solids.
After heating up the mass of butter and weed, set up a large glass
jar with a wide mouth on the side half full of water. While the
butter is still hot, pour the shit thru a strainer and place in the
freezer.
When you come back, the shit will have
formed two very distinct layers, the butter fats on top, and the
useless water and solids on the bottom. If you let it cool enough,
you should be able to stab it with a fork and lift it out.. now use
this butter as is to cook with in place of shortening. It can be
put on toast in the morning if you wanna fuck up your day… it does
take a while for ingested marijuana to work, so use sparingly.
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
Edited
by - jboogie on Mar 17 2005 2:40:59 PM
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 17 2005 :
2:45:49 PM
|
|
What else can
you do with the pulp?
There are other things you can do…
Boogie doesn’t partake in the eating of too much marijuana… it
wastes him and makes him lethargic. On the other hand, he enjoys
the effects of hash oil very much. Sometimes he allows the pulp to
air dry in a thin layer (to inhibit mold) and then adds it to this
gallon of alcohol. After a half pound has gone into the jug (it
gets strained, so the weed doest sit in there all the time) he
reduces this down and runs an isomerization to yield some very
potent oil..
The procedure is outlined on this site
as well…
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
Edited
by - jboogie on Mar 17 2005 2:46:55 PM
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 17 2005 :
2:57:39 PM
|
|
oh.. and note to superman..
if the weed is full of seeds, once it
goes thru the blender the seeds are easily removed... as they float
and are strained out quickly.
sometimes Boogie has to make a new seed
stock to keep the dream alive, just in case, so when he collects
the seeds he needs, he "ices" the rest of the seed stock
to make some great hash!
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
Edited
by - jboogie on Mar 17 2005 2:59:17 PM
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jboogie
Tech Support
|
|
|
jackoozzi
Thunder Down Under
|
|
Posted - Mar 17 2005 :
3:58:42 PM 
|
|
Thanks jboogie this is a great thread
|
|
|
A Smith & Wesson beats 4 aces
|
|
|
|
|
Country:
Australia | Posts: 223
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 17 2005 :
4:03:24 PM
|
|
once the next batch finishes ill put up a
full pictorial of Boogies adventures with the blender...
pictures are always good.
there are a few pics at the lycaeum of
nigfis's adventures with bubble hash. its just pics of the finished
product. i want to photo-essay the whole process.
the cool thing is if ou get a strain
that finishes in 45 days, you can make up to a half ounce of hash
from trimmings.
boogie only has the room to get 2 pounds
every 45 days, but this is more than enuf to pay for haagendaaz and
cool pipes. plus, he always has some hash to some when young girls
come over... young girls like it when you get them all fucked up..
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jackoozzi
Thunder Down Under
|
|
Posted - Mar 17 2005 :
4:13:45 PM
|
|
Pics are really good but not as good as young
girls especially when there fucked up
|
|
|
A Smith & Wesson beats 4 aces
|
|
|
|
|
Country:
Australia | Posts: 223
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 17 2005 :
4:17:32 PM
|
|
i posted some of those pics too!
the pics of Jen and Noelle..
theyre way hot and like the buzz enuf to
take their clothes off once they get fucked up..
speaking of which, i need to have noelle
over before she finally marries the duche bag shes been with for
the last year. it never stopped her before though.. heheeh.
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jackoozzi
Thunder Down Under
|
|
Posted - Mar 17 2005 :
4:22:06 PM
|
|
Yeh i remember seeing them and thinking to
myself i should go shift in with jboogie
|
|
|
A Smith & Wesson beats 4 aces
|
|
|
|
|
Country:
Australia | Posts: 223
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 17 2005 :
4:26:28 PM
|
|
all the time in this town...
get out your shoehorn and baby oil..
this is a college town, so when all the
highschool girls are nighty-night at mommy and daddys, you can go
pick up college chicks at the local water holes... i guess they
could be considered a local watering hole too.. but yeah, chicks
rule.
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
hest
New Dreamer
|
|
Posted - Mar 18 2005 :
05:01:57 AM
|
|
Iff wee talk maximizing ouput the fertiliser
is THE key
MAKE YOUR OWN
It's not that complicated (and all the
info is out there, othervice I'll write it here)
The important point is to use
Calciumnitrate as the Nitrogen source, this will let the plant bee
much more buchier than when using potasiumnitrate (as the usual
commercial mix use)
The sec. most important thing is a
dehumidifier (ore living in a dry place ;-))
Then there iss all the hype abouth CO2
ect, but actual it's not that important (nort worth the effort iff
you ask mee)
1 1000W lamp yeald more lumen (aka
light) than 3 400W. 1000W/M^2 is enough.
Guess thiss is the essens of some years
of growing.
For the 'soil I prefer wather (hydro)
but I'v seen soilsystem working just as well (but when groving
100's of plant getting rid of garbige is a matter of interes, and
wather is soo easy to put down the drain (hard to doo with rockwool
:-) )
|
|
|
|
|
Country:
| Posts: 45
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 18 2005 :
11:17:52 AM
|
quote:
The
sec. most important thing is a dehumidifier (ore living in a dry
place ;-))
this is so true...
boogie lives in the little barefoot
sweatbox of the south, so mold is a problem. its hard to control
mold once it develops, and can destroy an entire crop in a matter
of days..
a fan is required, to keep air
circulating, and a dehumidifier is a must for any serious grower.
sativa strains grow with a thick and
tight bud mass that easily mods without measures to protect it...
it suck to grow a 120 day sativa, to
find mold has claimed a good percentage or all of it...
definitly an important feature in the
modern grow room.
Boogie does use rockwool, as bugs dont
like i near as much as dirt..
Rockwool is slightly acidic by nature,
and the pH must be watched when using it. the disposal is great;
when its done toss it away... and i dont feel bad cause it not
plastic, but actual spun rock.. a natural source.
i dont think the CO2 is a major
nessisity to a great garden. and unless everything else is perfect,
then the plant can even use the CO2. for example, if a plants is
being over watered or malnurichied, it doesnt have the ablity to
use the CO2 like a healthy plant. thats why i think it funny to
hear people worry about CO2, but they still cant even gro a bud...
and plants only use the CO2 during photosynthesis, so you dont need
it all the time like most people want to do..thinking it will help.
boogie uses 1 1000 watt most of the
time... he has an additional 450MH and another 1000HPS, but your
right... its overkill.
anyways, it makes the heat and the light
bill go up, with not growh improvment. and yes, a 1000 HPS is more
efficient and produces more lumens per square foot with the same
amprage.. so its nicer to have tho 1 1000 on a suncircle than to
have 3 stationary 400 watters.
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar
18 2005 : 6:52:55 PM
|
|
this is
the starting material... its a Boogie patented blend. the strain
geneonlogy would go like:
AK47(f) X Haze2(m)
.
.
product(f) X AK48(m)
.
.
product(f) X blueb/Amst(hermoMale)
.
.
resultant female
after blending, this is how one removes
the big plant matter.
after fishing mostof the shit out, let
it chill and do the secong straining to catch swollen particles.
after straining, this is the resultant
liquid rich in trichromes and disolved chloraphyl(sp)... the chlor
stays disolved and doesnt hurt us here.
after the ghetto vac (which i didnt
discuss, cause you can figure out vacuum filtration) this is the
filter cake, of the trichromes collected. this mix is particlarly
green because the strain used was a 75% sativa which typicly
produce a small xtyl... so alot more particulate came thru casue it
got ground for longer, to compensate for the reduced trichrome
size.
once the filter cake has been smashed
kinda dry, the whole swatch goes into the freezer, and after frozen
can be ripped off to reduce mechanical losses. this shitdoesnt
handle well untill dry and pressed.
thats the shit when it hits the plate
after gettin ripped off the swatch. it isnt dry, and is still
frozen right this second.
the goods... smooth sativa smoke. a
tickling of the olfactories...
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
Edited
by - jboogie on Mar 18 2005 7:41:44 PM
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
jboogie
Tech Support
|
|
Posted - Mar 18 2005 :
6:56:44 PM
|
|
this was a particularly small batch made to
illustrate the principal.
it also show how efficent one can be
with small amounts.
sometimes the small batches turn up
higher yeilds that super batches...
from this run... 9.25 grams of bud made
2.4 grams of great hash.
|
|
|
Boog Night
isn't a chemist, bUt He plays one on Wetdreams.ws!!
Ask him how!
|
|
|
|
|
Country:
Afghanistan | Posts: 1342
|
|
|
|
|
Topic
|
|
|
|
