Glock Armorer's course

[Corona]

Two torrents... one a book and the other a video of a guy teaching you everything there is to know about a Glock, by taking it apart.
---------------------------------------

http://www.demonoid.com/files/details/1051639/695313/

Master Gunsmith Robert Dunlap uses a rare Original Factory Cutaway pistol to reveal the intricate inner works of this revolutionary pistol design. The total disassembly and reassembly of this pistol can be intimidating. AGI shows you how step by step. This course is applicable to all models of the Glock even the new compact models 26 & 27. In addition to proper maintenance techniques you will also learn how to make this great pistol even more reliable.

699.87 MB
----------------------------------------

http://www.demonoid.com/files/details/1134885/386285/

A book that adds to the video. Glock armorer's manual.

6.28 MB
--------------------------------------

I'm from Pakistan (the President carries a Glock too), where the average guy is far better armed than the average American... and I have never fired a weapon.

All I can do is drool over such videos and curse myself. :o

[InfernoMDM]

Reading from the posts this guy has made he has several other books, etc on firearms. I really would like to see his collection and compare it to bigger hammer.

Although interesting the Glock is a relatively simple design compared to just about everything else on the market. The only really large differences come in early generation 9mm (had 2 pins) and some of the errors Glock had in manufacturing throughout the years such as shortening a section metal to reduce cost etc. Most of those issues are gone now, or have been recalled.

However he has AR-15, SIG etc information that would be very interesting.

Also as I noted in your PM the site isn't open at the moment so no invites for me. :(

[akinrog]

http://www.demonoid.com/files/details/1051639/695313/


While I could download the second torrent, I could not download the above torrent since it says I need to register :mad:

I would appreciate too much if someone post the torrent here as an attachment or on rapidshare. Regards.

[Corona]

Watch the Demonoid website everyday. I promise you, they will let in more members. They open registrations only for a day or two, every week or two weeks. Just catch them at the right time. Usually around Fridays, Saturdays.


I would appreciate too much if someone post the torrent here as an attachment or on rapidshare. Regards.


Brilliant idea. I have put the torrents (all the ones in this post and the one you couldn't get) in a RAR (no password).

http://rapidshare.com/files/28839767/noodles_of_the_gods.rar.html


The Glock Manual is here:

http://rapidshare.com/files/28841139/more_noodles.rar.html



-------------------------
SIG

http://www.demonoid.com/files/details/1058647/540799/

The SIG is one of the favorite pistols of todays law enforcement officer. High quality and reliable. This Armorer's Course goes inside a Factory Cutaway to teach you the complete design and function of this pistol. Also included is total disassembly, reassembly, basic trouble shooting and repairs. 2 hours.

Instructed by Robert Dunlap. 699-MB
------------------------

More from this guy....

http://www.demonoid.com/files/details/597578/618056/

Professional gun cleaning.

This one is a must see for all firearms owners and anyone wanting to know how to clean guns really well! Instructor also explains various tools and brushes you need to have and effective cleaning procedures for all types of guns that won't cause any damage!

Here is the official description:
" Learn how professionals clean and maintain their firearms. What equipment is best, types of lubricants, why and when to use them, lead removal, bore cleaners and the latest methods."

Length: 1hour 13 minutes. 633.66 MB

Enjoy!

http://www.americangunsmith.com/view.php?id=24
---------------------------------------

http://www.demonoid.com/files/details/678821/77257/

Buying and collecting used firearms without getting burned

This is a fantastic video for people wanting to buy used firearms but don't know what to look for and how to determine a quality firearm. Also very good for people that want to start collecting because it talks about things that add and detract value in a firearm and the effects a modification could have. Very informative and useful video!

Official description:
"Don't buy another pistol, rifle or shotgun without seeing this first. Darrell Holland teaches you how to judge finish and condition ... what adds value and what detracts ... how to assess the mechanical condition of different action types ... what to look for and what to avoid. Save $$$ and protect yourself from getting burned! 2 hours. Ideal for the novice shooter and collector."

http://www.americangunsmith.com/view.php?id=19

Format: .avi

Length: 1hour 47minutes. 699.48 MB
----------------------------------

http://www.demonoid.com/files/details/904651/77257/

Selecting, Understanding and Buying Rifle and Pistol Scopes

"Save $$ on your next Scope Purchase. Know the difference between Quality and Junk! Over 100 minutes of fast moving detailed information that will help you make an informed choice and save money by getting the most for your dollar. Numerous questions are answered such as: What is the best reticle type for you? What do you look for in construction and optics? How do you distinguish quality from junk - regardless of price? Dozens of models and types from various manufacturers are featured and explained. Includes proper mounting techniques. Save hundreds or thousands of dollars. Instructed by Darrell Holland. "

699 MB
---------------------------------

http://www.demonoid.com/files/details/1009202/154514/

AR-15 Armorers Course

Understand step-by-step how the AR-15 and it's clones function including how the unique gas system works. Complete assembly and reassembly, lubrication, maintenance, feeding, trouble shooting, solutions and repairs are all explained and shown in eye-opening detail. Along with what critical spare parts are needed to keep on hand. Concludes with installation of a .22 LR conversion kit and a target shredding live fire full auto demonstration. Instructed by Robert Dunlap.

Format: .avi
Length: 1h 40 mins. 699 MB

http://www.americangunsmith.com/view.php?id=25
-----------------------------

http://www.demonoid.com/files/details/1023018/618056/

Ruger 10-22 Armorers Course

Over a Million 10/22 owners can't be wrong! This IS a great little rifle and we will teach you how to get the most out of your 10/22. Includes complete disassembly, reassembly, step-by-step design and functionn, and tricks to insure that you keep your gun performing at it's best. The inner working of the clever rotary magazine are revealed along with how to disassemble and clean it. Customize your rifle as we exaimne and demonstrate a number of accessories, including heavy target barrels, muzzle brakes, exotic magazines, custom stocks and a rare demonstration of a 10/22 "Gattling Gun" Kit. 81 minutes.

Format: .avi. 699 MB

NOTE: Make sure to watch the last few minutes of this video. Gattling Gun will make you fall off your chair!
----------------------------------

http://www.demonoid.com/files/details/1034201/77257/

AK-47 Armorers Course

The Automat-Kalashinikov (AK-47) is without a doubt the most prolific rife ever produced. Over 50 million of these "assault rifles" have been manufactured in Russia, Bulgaria, China, Egypt, Yugoslavia, and other countries combined. Tens of thousands of the semi-auto variant have been sold in the USA, including the MAK-90, NHM-91, SA-93, Maadi, Valmets as well as others. This armorer's course will explain in detail why this design is so rugged and how to insure continued reliability. Close-ups are shown of all the internal parts using a cutaway gun and complete step by step assembly/dissassembly is demonstrated. Numerous simple repairs are explained and a list of critical spare parts presented. Instructed by Master Gunsmith Robert Dunlap. Applicable to all makes and models.

http://www.americangunsmith.com/view.php?id=30

Format: .avi
1h 22mins . 699 MB
------------------------------------

http://www.demonoid.com/files/details/1039579/695313/

Lee-Enfield Armorers Course

Understand clearly how to identify all the Enfield variations, complete assembly and reassembly is covered using a factory cutaway. Many rare accessories are shown. Also covers repairs and sporterizing. 2 hours.

http://www.americangunsmith.com/view.php?id=35

699 MB
------------------------------------

http://www.demonoid.com/files/details/1064018/618056/

Mossberg 500 Armorers Course

An excellent value for the money, the Mossberg 500 series has seen massive acceptance with sportsmen all over the world. But these shotguns do have a few problems that this course will help you to solve inexpensively. For example, you will learn how to properly repair a broken plastic trigger group (a common problem but an expensive and hard to get part). Also numerous tricks and techniques are provided to insure reliable operation. Just the assembly and cleaning portion of this video course will save you $30-40. A rare factory cutaway is used to clearly demonstrate the inner workings.

699 MB
------------------------------

http://www.demonoid.com/files/details/1068967/540799/

Remington 700 Armorers Course

" Join Master Gunsmith Robert "Bob" Dunlap as he shows you all the ins and outs of the Remington 700 Rifle. Bob teaches you complete disassembly and assembly (not just field stripping!), parts identification, proper cleaning and lubrication. We give you step-by-step instruction in design, function and repair, including locking systems, feeding systems, sears, and triggers. Stocks are also covered along with easy repairs for common problems. Bob will take you inside this rifle and show you what each part is supposed to do and how to maintain and repair it. "

Format: .avi
Length: 2hrs. 699 MB
---------------------------------

http://www.demonoid.com/files/details/1096273/231771/

High Standard Armorers Course

From the rare single shot pistol manufactured at the turn of the century, to the exposed hammer H.D. Military to latest competition grade models made by the New Hi-Standard Manufacturing Company of Houston Texas, this AGI Armorer's Course covers them all in comprehensive detail. A fascinating look at one of the most successful 22LR Target pistols ever made, the Hi-Standard has a very interesting history, much of which is documented by AGI for the very first time. Other subjects covered include how to determine which method you must use to disassemble a particular model. Using the wrong method can result in permanent damage to the pistol! Also basic function and repair is covered along with trigger and safety adjustments.

694.48 MB
---------------------------

[chemdude1999]

The AGI courses are first rate. If we could just get someone to upload the entire Master Gunsmithing Course set. Wishful thinking, I know. AGI is very active in their pursuit of pirates.

[GMike63]

Thanks for posting the torrents themselves, I started them last night. But -I lucked out and just got registered at demonoid.com- it's not Friday but its open right now. So if you are reading this 2MAY07 give it a try, or try randomly (not just Fridays as advertised!) Good Luck...

[InfernoMDM]

The AGI courses are first rate. If we could just get someone to upload the entire Master Gunsmithing Course set. Wishful thinking, I know. AGI is very active in their pursuit of pirates.

Most of that information is already online, its hunting it down thats the hard part.

[InfernoMDM]

Alright just to add on some details about the video. I believe a few of the issues presented in the video mainly the chamber rounding has been done in factory. I will also point out if you do to much(like the man says but no one ever listens) the glock should run no problems. I agree with the guy the glock is pretty, but it works and in all honesty the smithing in this video is mildly pointless unless your having a issue. However it has a lifetime warranty.

One think he didn't know at the is that you can cut the grip down considerably and put the lower capcity magazines in while still retaining sight radius(helps in accuracy). Just be careful or you can cut to high and destroy the magazine release area. www.glocktalk.com has most of the info in the video, but the video is very informative if you haven't handled many guns.

I am now interested in seeing more of these videos as they do go in depth in many areas.