As promised to Rhodium here is the typed version (IR and NMR spectra and MS data were left out) of
J. Chem. Res. (M), 1982, 1142-1165
(
http://www.geocities.com/legochemistry/journals/1.html)
Some obvious errors were corrected (e.g. missing brackets or g instead of mg) but please notice that this article is a miniprint. So reading the text was quite difficult and there can bee erros especially concerning numbers. The scanned pages can bee requested via PM (each of the four has 4 MB!).
As far as Lego understands this article it seems to bee possible to obtain MD-P2P from safrole via MD-P2Pol.
An improved synthesis of indole derivatives related to Indomethacin from natural SafroleEliezer J. Barretro*, Paulo R.R. Costa**, Perola Regina V.R. Barros and Waldemir M. Queiroz.
* Departamento de Quimica, Universidade Federal de Sao Carlos, 13.560, Sao Carlos, S.P., Brazil.
** Nucleo de Pesquisas de Produtos Naturais, Universidade Federal de Rio de Janeiro, Bl. N, 21.941, R.J., Brazil.
The indole moiety is present in a great number of natural and synthetic biologically active compounds
1. Particulary in the group of non-steroidal antiinflammatory agents (NSAIA)
2, among other aryl acetic acids, indomethcain
13 occupies an outstanding position. In view of the continous efforts in the preparation and pharmacological evaluation of new NSAIA
4, we became interested in preparing analogues of
1, using abundant and readily accessible natural products as inexpensive starting materials. With this objective in mind, the indolyl-acetic esters
2 and
3 were chosen as initial target compounds. Using natural safrole
45 as starting material it was possible to develop under mild conditions, a synthetic sequence of high yield in which the key in the preparation of
2 and
3 is a reductive cyclization of the appropriate nitro-[beta]-keto ester
5 and
6 (Scheme 1).
In order to obtain
5 (Scheme II) the double bond of
4 was oxidized affording epoxysafrole
7 in good yields. As expected
6 this compound produces the alcohol
8 (90%) by a regiospecific oxirane ring hydrogenolysis (method B). Nitration of
8 in very mild conditions
7 (HNO
3)/CHCl
3) gave
9 in quantitative yield. Alternatively, the alcohol
8 (93%) was synthesized by an oxymercuration-demercuration sequence
8 (method A) from
4. The next step in the choosen synthetic sequence was the preparation of the methylketones
10 and
11 that was attempted by oxidation of the alcohols
8 and
9 with pyridinium chlorochromate (PCC)
9 (method A) or Jones' reagent
10 (method B). The nitro methylketone
12 could be C-alkylated with ethyl bromoacetate, using the intensely violet colored benzylic enolate, prepared by treatment of
12 with sodium hydride in dimethylformamide
11, to furnisch the desired ester (78%). On the other hand, the lithium benzylic enolate, generated by treatment of
10 with lithium diisopropylamide (LDA) in tetrahydrofuran
12, was C-alkylated to provide the ketoesters
11 (85%) which by nitration gave
5 (98%).
Scheme IScheme IIScheme IIIIn order to obtain the nitro-[beta]-keto esters
6, we developed the synthetic route described in Scheme III. Thus, reaction of
4 with N-bromosuccinmide (NBS) in acetone/water produces a mixture of isomeric bromohydrins
13a-c13. This mixture was treated with sodium cyanide in methanol under reflux, and the crude reaction product
14 submitted to a careful alkaline hydrolysis
14 (H
2O
2, EtOH, 6N NaOH) gave the desired amid
15 as the
sole product to crystallize as a clean colourless material from the reaction mixture. This useful sequence can be run on a 30 g scale without isolation of intermediates, in 50% overall yield. Alternatively, the bromohydrin
13a can prepared in quantitative yield by direct bromination of
7. The formation of this dibromo compound
13a can be understood by initial bromination of the 5-position of the aromatic ring followed by regioselective opening of the oxirane
15 ring by the hydrobromic acid liberated in the reaction medium. A pure sample of
14 could be obtained (65%) by reaction of
13a with sodium cyanide in methanol. The conversion of
15 into hydroxy acid
16 (90%) was attempted by akaline hydrolysis. A one pot procedure for the transformation of
16 into
17 was accomplished in 75% yield by hydrogenolysis of C-Br bond over Pd/C using methanol as solvent that permits the acid catalytic esterification by action of the hydrobromic acid formed in the reaction vessel. Finally, nitration of
17 gave
18 (90%) which, when submitted to oxidation with PCC
9 or Jones' reagent
10 provided the nitro-[beta]-keto ester
6 in 80% yield.
With the nitro-[beta]-keto esters
5 and
6 in hand we proceeded to the last key step of the synthetic route,
viz, the reductive cyclization reaction
16 to provide the indole derivations
2 and
3.
So, when a methanolic solution of
5 was submitted to catalytic reduction (H
2, Pd/C 60 psi) for 15 minutes at room temperature, immediately followed by solvent elimination in vacuum and subsequent "flash" chromatography filtration over silica gel, the desired indole
2 could be obtained in 80% yield, in the form of a clear oil. On the other hand, catalytic reduction of
6, under identical conditions, afforded
3 as pale yellow crystals (85%).
In conclusion, the synthetic sequence here described is useful for the preparation of indoleacetic esters starting from the allylbenzene moiety present in various abundant natural compounds such as safrole
4. The potential biologically active indole derivatives
2 and
3 can be prepared in high overall yields (46% and 20% respectively) using easily acessible reagents and mild reaction conditions.
We are indebted to the Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (40.1424/80) for financial support and fellowships to PRVRB and VMQ, to Professor Walter B. Mors (NPPN, UFRJ), for his continous encouragement and to Professor Timothy J. Srcokson (UFSCan) for his valuable suggestions.
References:1. Pharm. Acta. Helv., 1973, 53, 65
2. Ann. Rept. Med. Chem., 1975, 10, 172, Ann Rept. Med. Chem., 1974, 9, 193
3. U.S Paten, 3, 242, 185 (Chem. Abstr., 1966, 64, 17555)
4. Inter-Alia: T.Y. Shen, J. Med. Chem., 1981, 24, 1; G.Y. Paris, D.L. Germaise, D.G. Cimon, L. Swett, G.W. Carter and P. Young, J. Med. Chem., 1980, 23, 9; D. Evans, D.W. Kunwell and T.A. Hicks, Australian (1970), 506, 085 (Chem. Abstr., 1980, 92, 169251t); M. Nagakura, T. Ota, N. Shimidzu, K. Kawamura, Y. Eto and Y. Wada, J. Med. Chem., 1979, 22, 48; J. Jeske and K. Stoskla, Acta Pol. Pharm., 1978, 35, 611.
5. W.B. Mors and C.T. Rizzini, "Botanica Economica", Epu, Sao Paulo, S.P., Brazil, 1976, p. 149.
6. R.L. Augustine, "Catalytic Hydrogenation", E. Arnold (Publishers), LTD, London and M. Dekker, Inc., New Yorik, 1965, p. 137
7. cf. D.R. Buckle; D.J. Outred, J.W. Ross., H. Smith, R.J. Smith, B.A. Spices and B.C. Gasson, J. Med. Chem., 1979, 22, 158.
8. H.C. Brown and P.G. Georghegan Jr., J. Org. Chem., 1970, 55, 1844.
9. E.J. Corey and W. Suggs, Tetrahedron Lett., 1975, 2647
10 The Jones' reagent was prepared as descripted in L.F. Fieser and M. Fieser, "Reagents for Organic Synthesis", John Wiley and Sons, Inc., New York, vol. I, p. 142
11. I.K. Stamos, Synthesis, 1980, 664
12 J.P. Albarella, J. Org. Chem., 1977, 42, 2009
13. The formation of
14c can be explained by the participation of a phenonium ion intermedite: Tetrahedron Lett., 1975, 4535.
14. C.R. Noller, "Organic Synthesis", Coll. II, John Wiley and Sons, Inc., New York, p. 586.
15. Treatment of epoxyde
7 with hydrobromic acid in acetone:water gives exclusively 4-(3-bromo-2-hydroxypropyl)-1,2-methylendioxybenzene.
16. We have published previously the cyclization of
12 to 5,6-methylendioxy-2-methylindole in 60% yield
17. Using the modified conditions described here this transformation could be accomplished in 90% yield.
17. cf. E.J. Barreiro, P.R.R. Costa, R.T. de Wello and P.R.V.R. Barros, An. Acad. brasil. Cienc., 1981, 53, 65.
ExperimentalThe
1H NMR spectra were run with Varian XL-100-12 (100 MHz) and Varian EM-360 (60 MHz) instruments, using the indicated solvent and Me
4Si as internal reference. The i.r. spectra were recorded with a Perkin-Elmer 137-8 spectrophotometer, using KBr pellets. The u.v. spectra were recorded with a Beckman DGB spectrophotometer using EtOH (Uvasol) as solvent. The mass spectra were obtained with a Varian MAT-CH5-DF instrument coupled to a Varian MAT SS-100 computer system. The m.p. were determined in a Kofler apparatus. The hydrogenation reactions were performed in a Parr apparatus. Combustion analyses were carried out by CENPES - Petrobras (Rio de Janeiro, Brazil).
4-(2-Hydroxypropyl)-1,2-methylendioxy (
8)
Method A - Oxymercuration-Demercuration of safrole (
4)
Safrole (12.43 g, 76.7 mmol) was gradually added to a stirred solution of Hg(OAc)
2 (25.0 g, 78.6 mmol) in THF (230 ml):H
2O (75 ml). After 1 h at room temperature the yellow color was discharged and the reaction mixture was alkalinized (3M NaOH aq., 75 ml) followed by addition of a solution of NaBH
4 (1.45 g, 38.15 mmol) in 3M aq. NaOH (75 ml). After 1 h the reaction mixture was saturated with NaCl, the organic layers separated and the aqeuous layer was extracted with EtOAc (4x250 ml). The combined organic layers were then washed successively with H
2O (3x100 ml) and saturated brine, dried (anhy. Na
2SO
4) and evaporated to give
8 (12.7 g, 96%) as a clean viscous oil. An analytical sample was obtained by chromatography on silical gel using hexane-EtOAc (8:2) as eluent.
Method B - Hydrogenolysis of epoxysafrole (
7)
A mixture of
7 (5.0 g, 27.7 mmoles) and 10% Pd/C (1.0 g) in MeOH (30 ml) was submitted to hydrogen pressure (65 psi). After 3 h the catalyst was filtered and the solvent evaporated to affort
8 (4.55 g, 90%) as a clear brown oil.
Procedure for nitrations
5-Nitro-4-(2-hydroxypropyl)-1,2-methylendioxybenzene (
9)
To a solution of
8 in CHCl
3 (110 ml) was added HNO
3 (d = 1.52, 3.62 ml). After 40 minutes at room temperature the reaction was neutralized with Na
2CO
3 aq., washed with H
2O, dried (Na
2SO
4) and evaporated furnishing
9. (0.75 g, 100%) as yellow solid: m.p. 117-119°C from AcOH:H
2O
[...]
5-Nitro-4-(2-oxo-1-carboxymethylpropyl)-1,2-methylendioxybenzene ethyl ester (
5)
In a 1.5 mmol scale
11 was nitrated as described above to give as product a clear brown oil. This residue crystallized from AcOH-H
2O gave
5 (80%): m.p. 96-98°C
[...]
5-Nitro-4-(3-methoxycarbonyl-2-hydroxypropyl)-1,2,-methylendioxybenzene (
18)
In a 30 mmol scale
17 was nitrated as already described to give a brown solid. Recrystallization of the crude product from AcOH:H
2O gave as yellow crystals: m.p.. 106-109°C
[...]
PCC-Oxidations (Method A)
Oxidation of 5-nitro-4-(3-methoxycarbonyl-2-hydroxypropyl)-1,2-methylendioxybenzene (
18)
A mixture of
18 (1.41 g, 5.0 mmol) and PCC (3.23, 15.0 mmol) in CH
2Cl
2 (75 ml) was allowed to react overnight at room temperature. The solvent was separated by filtration and residue washed with CH
2Cl
2 (2 x 50 ml). The combined organic fractions were evaporated and the residue filtered over silica gel (40 g) using CH
2Cl
2 as eluent, giving
6 (1.11 g, 80%) as a yellow solid: m.p. 86°C from AcOH-H
2O
[..]
Oxidation of 4-(2-hydroxypropyl)-1,2-methylendioxybenzene (
8In a 3 mmol scale the oxidation of
8 as described above followed by filtration of the crude product over silica gel gave
10 (75%) as a colorless oil:
v
max 1720 cm
-1, [delta]
H (60 MHz, CCl
4) 6.60 (3 H, narrow, m), 5.87 (2 H, s), 3.46 (2 H, s), 2.00 (3 H, s) ppm; m/z 178 (M
+, 20%), 135 (100%).
Oxidation of 5-nitro-4-(1-hydroxypropyl)-1,2-methylendioxybenzene (
9)
In a 30 mmol scale the oxidation of
9 as already described gave
12 (86%) as yellow crystals: m.p. 139-141°C from AcOH-H
2O
[...]
Jones Oxidations (Method B)Oxidation of 5-Nitro-4-(2-hydroxypropyl)-1,2-methylendioxybenzene (
9)
To an ice cold solution of
9 (1.1 g, 4.9 mmol) in CH
3COCH
3 redistilled from KMnO
4 (70 ml) was added dropwise a solution of Jones' reagent
10 until a slight excess was present (2.0 ml), followed by addition of a saturated solution of NaHSO
3 (10 ml). The organic layer was separated and the residue extracted with EtOAc (3 x 100 ml). The combined organic extrats were washed with aq. NaHCO
3 (50 ml), H
2O (50 ml), saturated brine, dried (Na
2SO
4) and evaporated. The residue crystallized from AcOH-H
2O gave
12 (0.89 g, 80%).
Oxidation of 4-(3-hydroxypropyl)-1,2-methylendioxybenzene (
8)
In a 1.5 mmol scale
8 was oxidized as above giving
10 in 78% yield, after purification by preparative TLC over silica gel.
Oxidation of 5-Nitro-4-(3-methoxycarbonyl-2-hydroxypropyl)-1,2-methylendioxybenzene (
18)
In a 10 mmol scale the Jones' oxidation of
18 was run as above affording
6 as a crystalline yellow solid crystallized from AcOH-H
2O in 72% yield.