Well, since Pickler is in a rather nice mood today, he's gonna help ya.
nano scale,curbshot style!
Materials list:
Extraction*
1. 8 oz. denatured alcohol
2. 24 pfed pills 60mg
3. 12 oz glass jar / lid.
4. 2 coffee filters /funnel
5. Corning/Pyrex plate
6. Heat source (no open flame)
Crush your pills and put in 12oz glass jar, pour the denatured alcohol also into the jar and fit with lid. Shake
jar hard a few minutes, put in freezer and wait 10. Min. Shake again and keep in freezer another 20 min.
Carefully pour the top layer into funnel pouring on top of coffee filters exiting funnel onto glass dish.
Evaporate alcohol to get your pfed. Should be around 1.5gm
Materials list:
Reaction*
1. Test tube (cigar tube works good )
2. 3in. Balloon ( standard kids size water balloon)
3. Black electrical tape
4. Soup can filled with damp sand.
5. Candle (buy the kind that sit in glass bowl)
7. Pfed / iodine / red phosphorus
Note: using 2 soup cans one on top of the other makes perfect source of heat to the moist sand. Construction
very simple the lower can has holes drilled through out it for cooling and air supply for flame. Now with candle
lit in 1st can place 2nd can right on top. Sand will warm instantly and your ready to go . You will be using 1 ~
11/2 gm's e 3gm's i 2gm's r
Note: the ratio is based on your more then likely using mbrp and iodine from tincture. Do not adjust ratio.
Reason being never once while nano pondering had failure or half reacted product, and never yielded under 60
% so follow instructions and don't make any adjustments. From start to finish takes swim 2 hours give your
self probably 21/2. You will end up with at least .7 gm of get your dick hard meth. Don't get me wrong swim
has seen his share of failures during his adventures of cooking but for some fucked up reason those were only
seen in much larger scale cooks. Swim has taught friends this nano scale procedure because some people have
a really hard time understanding the mathematics of producing meth. Learning this way will not only teach you
the basics. You learn hands on, you can ask any of big boys Methead, Worlock , Placebo , Rhodium , fuck
there's a lot of them now . Producing high quality meth fail safe consistently is a skill that takes 100 % visual
/ observing and actually knowing what is happening while its happening and knowing that fine line of needed
adjustments if things don’t go as planned. Witch makes this synth a good tool to help exercise your
observational skills and get you clued in on what’s going on. And main thing, a fat bowl load when finished.
Put test tube in freezer about 5 min before adding chemicals, once all 3 are added ( I2 1st, E 2nd , RP 3rd ),
you will have 3 distinctive layers in test tube, next you will need your tape & balloon ready. With an eye
dropper add 4 drops peroxide ,fit the balloon on tube (only needs to be on 1/2 inch let the slack hang over
)now tape the balloon to the glass tube, shake the 3 reactants to mix well ( don’t let any get into the
balloon)the rxn will start , push tube into the sand 21/2 ~ 3 in. Set your timer for 1 hour and exercise your
observational skills take notes on what you see, after a handful of runs at this soon you won't need to set a
timer because you have schooled yourself and now have your own tools (sign's) that completion of the rxn is
there . But for now go with 1 hour no more no less, blow your candle out and let cool in sand for 15 min. Take
your now room temp. test tube and cut balloon off. Add 20ml dH2O. With thumb over the hole shake up filter
out the red ( its good to have a few test tubes clean and handy) by pouring liquid into another test tube using
small funnel and 1 coffee filter(saturate filter with dH2O prior to using)now your left with clear /yellowish
liquid
Crystallizing*
1. Red devil lye
2. Charcol liter fluid
3. Muriatic acid
4. Dh20
Add 8gm's of lye crystals into test tube (not the one with yellow fluid in it use a new one!) Add 20 ml of dh20
to lye mix well, it will get hot put into sand to let cool. Now pour 50ml charcoal liter fluid into tube with the
yellow fluid, now grab the other tube with the lye/dH2O mix and slowly start pouring into tube with yellow
fluid/liter fluid (don’t pour it all in at once ! Add little splashes till all gone. Covering the hole give it one !!!
Shake release small amount of pressure that built up and set tube in the sand wait 15 min your lye mix will be
locked on bottom of the tube this is fine pour off liter fluid into clean test tube add 20ml dh20 4 drops of acid
and shake hard . Using an eye dropper (may have to extend length using fish tank air tubing to reach bottom
of tube) retrieve bottom layer pour onto your glass dish and evaporate . That’s all folks what remains after
dH2O has evaporated is pure meth happy holidays bee'zzzzzz
Don't thank swim, thank Curbshot. There is also a 10g nano. Try the search engine.
We'll soon find out if I'm a chemist or not!