well a nice long pyrex testube will work perfectly.
extracting rp from SWIDK (source which i dont know) its easy with some nice solvent and some coffe filters.
for many...iodine is a tricky thing to find. but google is ur friend in that....trust me.
a 24 hour candle is not needed...since the proportions of the e i2 rp are way smaller...the reaction should be much quicker..about 6 hours.
a tricky thing is the condenser.
the temp for a nice reaction is about 100c.
it wont take long until the whole testube will reach 100c so the baloon might melt.
but i came out with another way of making a ghetto nano condenser.
for this kind of synth u need the following things
1 long big pyrex testube
2 thin medium testube
2 clamps or something that would do the same.
dry ice
6 hour candle.
(the big and the small testube should have a close size diameter)
(https://www.thevespiary.org/rhodium/Rhodium/hive/hiveboard/picproxie_imgs/f37eca14b2fda38971eda6fdea29a57a.gif)
a thermometer is not necessarely needed
just test the apparatus with only water and see at what distance from the candle the water starts boiling.
the stand can be anything of course...i use one of those floor long lamp bars
a heat resistant clamp is easy to construct
now the big testube is placed and the E 12 rp was putted in.
the little testube was filled with big chunks of dry ice(big chunks takes longer to melt)
20 or more ml of water were poured inside the big testube.
the little thin testube with ice was placed inside the big testube exactly in the middle..like shown in the pic
the candle was lit and slowly the reaction starts.
keep another little testube with ice in the freezer.
lit the candle and the bubbling will start
the dry ice will last for about 2 hours. when u see that the ice inside is all back to liquid again, quickly change it with the one in the freezer.
the removed testube was emptied and filled with dry ice and left in the freezer again.
remember to keep eye on the reaction...dont just go out or start watching tv or the ice will melt and the hi will escape.
just change the testube everytime u sees the ice has melted.
if u wanna keep the reaction going for more than 6 hours....buy some more candles.
there u go....u got a ghetto mini condenser.
i never tried this before since im having problems extracting iodine but im pretty sure it will work..if u do it carefully of course.
ill let u bees try it out and tell me if it works propely..ok??
hope this came in handy
sorry for my bad english
c ya guys
navarone
Like my recent post concerning curb's nano implied, as long as you are not a resident of the US or Autralia Curbs nano might still be a valid intro to the process.
Intro. Intro. Intro. Should I say it again?
But don't waste your time on it if you are from the US or OZ and your precursor source is that of OTC decongestant and bronchodilator products.
should I say that once or twice more?
Shorty's 10g LWR is the one to look at. It's definitely a nano recipe. Since it's even a challenge for veteran bees to now push it beyond yeilding more than 5gs of end product plus the fact that newbies will realistically initially net about half of that figure,.... would any of you argue against the fact that ending up with 2.5gs would qualify as a nano amount?
That final amount just barely gets you enough to make recrystallization a practical endeavor.
And now with the arrival of the newest acrylic supergakks you'll be damned lucky to even end up with that.
I'm not trying to be a partypooping bubble buster here, just being realistic.
You aren't being fed bullshit about this.
For those of you who haven't yet finely polished your search engine skills I'll spoonfeed you a clue to the location of Shortys recipe. It's just a few posts away from this one. Post 482573 (https://www.thevespiary.org/talk/index.php?topic=8661.msg48257300#msg48257300)
(ChemoSabe: "Hit Single Version", Stimulants)
A further clue for those who somehow still couldn't find it with that first one..... "this should work...".
Anyone who's still lost after that clue should just quit right now. You'll never succeed with all the real world hurdles you'll need to clear concerning all this.
PS - Someone please shoot me if I now start turning into Osmium as upon proofreading this I think I'm definitely showing symptoms.
Post 482658 (https://www.thevespiary.org/talk/index.php?topic=8661.msg48265800#msg48265800)
(SHORTY: "This should work...", Stimulants)
I cant get my head around the fact that (e.g) 2 of 10 gms would take 2hrs but 2 of 2gms would take 24+ hrs. Its like you can reduce 2gms of pfed in 2hrs if you add an additional 8gms!
It hasn't got to do with the amout of pfed you add, it's about the other reactants.
If you use 2g pfed and add five times the usual amount of HI/RP (what you would normally use for 10g pfed), then you might be able to perform the reaction five times faster (in theory, in practice other factors sets in, as this is a multistep reaction), but usually people don't want to spend more reactants than necessary.
Anyhow, this effect is called the Law of Mass Action, and is explained all over the net:
Simple cartoon: http://www.yorktech.com/science/analogies/massact.htm (http://www.yorktech.com/science/analogies/massact.htm)
With equations: http://www.science.uwaterloo.ca/~cchieh/cact/c123/massacti.html (http://www.science.uwaterloo.ca/~cchieh/cact/c123/massacti.html)