Author Topic: 2010 Reference and Translation Requests (Read 4063 times)

java · « **Reply #280 on:** January 01, 2011, 12:36:21 AM »

Requested by salat

Organosodium and Organopotassium Compounds Part I: Properties and Reactions
Dr. M. Schlosser
Angewandte Chemie International Edition in English
1964, Vol. 3, No. 4, pg. 287
DOI: 10.1002/anie.196402871

--------------------

Organosodium and Organopotassium Compounds. Part II: Preparation and Synthetic Applications
Dr. M. Schlosser
Angew. Cheni. internat. Edit.
1964, 1 VoI. 3, No. 5, pg.362
DOI: 10.1002/anie.196403621

java · « **Reply #281 on:** January 01, 2011, 01:57:20 AM »

Requested by Evilblaze

"All of these are new and effective methods for producing 5-methoxyindole"

Structure-activity relationship study of novel necroptosis inhibitors.
Teng, X.; Degterev, A.; Jagtap, P.; Xing, X.; Choi, S.; Denu, R.; Yuan, J.; Cuny, G. D.
Bioorg. Med. Chem. Lett.
2005, 15 (22), 5039-5044.
DOI 10.1016/j.bmcl.2005.07.077

--------------------

Effects of Indole Fatty Alcohols on the Differentiation of Neural Stem Cell Derived Neurospheres
Djalil Coowar,† Julien Bouissac,‡ Mazen Hanbali,† Marie Paschaki,‡ Eliane Mohier,‡ and Bang Luu
J. Med. Chem.
2004, 47 (25), pp 6270–6282
DOI: 10.1021/jm0493616

--------------

ChemInform Abstract: Unsaturated Sulfinamides. Part 16. Substituted N-Aryl-alk-1- enesulfinamides: Preparation, Properties and Conversion into the Corresponding Indole Compounds.
J.-B. BAUDIN, M.-G. COMMENIL,
ChemInform
1996, Volume 27, Issue 42
DOI: 10.1002/chin.199642130

java · « **Reply #282 on:** January 01, 2011, 02:14:16 AM »

Requested by no1uno

Anodic Bonding of Glass to Aluminium
Schjolberg-Henriksen,K;Poppe,E;Moe,S;Storas,P;Taklo,M;Wang,D;Jakobsen,H
Microsystem Tech.
2004, Vol.12(5), pp.441-449
DOI: 10.1007/s00542-005-0040-8

Abstract
Anodic bonding of glass to aluminium may provide a higher degree of freedom in device design. In this paper, a systematic variation of the bonding parameters for the aluminium–glass bond is presented. Hermetic seals with strengths of 18.0 MPa can be achieved using a 50–100-nm-thick bonding aluminium layer, and bonding at 300–400°C applying a voltage of 1,000–1,500 V for 20 min. With these parameters, bond yields above 95.1% were obtained on 17 wafers. The bonds survived extensive thermal ageing without significant degradation. The possibility of bonding glass to an aluminium layer with buried, electrically isolated conductors underneath is also demonstrated.

java · « **Reply #283 on:** January 02, 2011, 09:43:14 AM »

Requested by no1uno

Designing an ignitor for short-arc xenon lamps
Moo,C;Lin,T;Chuang,Y
34th Annual IAS Meeting-
Conf. Record. 1999 IEEE Meeting
1968, Vol.1, pp.612-617
DOI: 10.1109/IAS.1999.800015

Abstract
A compact ignitor is designed for short-arc xenon lamps which require high ignition voltage and fast transition. The ignitor employs two stages of step-up circuits with two small sized transformers. A capacitor with an intermediate voltage is used for storing the energy converted from the DC power supply by the first-stage step-up circuit. The impact voltage necessary for igniting the xenon lamp is generated by the second-stage step-up circuit which is connected in series with the lamp and the DC power supply. The design of the ignitor for a short-arc xenon lamp of 350 W is discussed as an illustrative example

Author Topic: 2010 Reference and Translation Requests (Read 4063 times)

java

Re: December 2010 Reference Request thread....

java

Re: December 2010 Reference Request thread....

java

Re: December 2010 Reference Request thread....

java

Re: November 2010 Reference Request thread....